ABS

Title 24 Acceptance Test Finder

Select the systems and controls a nonresidential or multifamily project installs or replaces. The finder lists the mechanical acceptance tests, by NRCA-MCH form number, that those features usually require under California's 2025 Energy Code.

📝 Planning aid

The tests a project must pass are the ones on its approved Certificate of Compliance. Use this list to check that nothing obvious is missing, and to plan the schedule and the testing scope.

Title 24 Acceptance Test Finder (2025 Energy Code)

Tick everything the project installs or replaces.

Air systems
Controls and fault detection
Hydronic systems
Energy storage
Multifamily

Select the systems above to see which mechanical acceptance tests usually apply.

This is a planning aid. The tests a project must actually pass are the ones listed on its approved Certificate of Compliance (NRCC-MCH-E or LMCC-MCH-01-E, Table O), and some depend on equipment size and building type. All of the tests above must be performed by a certified Mechanical Acceptance Test Technician.

Why Missing Tests Are Expensive

The California Energy Commission has noted that acceptance testing compliance is low, often because the required tests were never identified on the Certificate of Compliance. The work then gets discovered at final inspection, when the certificate of occupancy is waiting on it, the controls contractor has demobilized, and every retest costs schedule. Checking the equipment against the test list at permit stage is the cheapest fix there is.

Each test is explained in Title 24 Mechanical Acceptance Tests.

Embed this calculator on your siteFree for contractors, schools, and engineering firms. Copy one snippet; it resizes itself.+
Preview the embed

Please keep the credit line under the calculator. The tool runs entirely in your visitors' browsers; nothing they enter is sent anywhere.

Frequently Asked Questions

How accurate is this list?+
It is a planning list based on which features typically trigger each test. The binding list is on the project's Certificate of Compliance, Table O of the NRCC-MCH-E or LMCC-MCH-01-E. Some tests apply only above certain equipment sizes or in certain building types, which this tool does not evaluate.
Does a rooftop unit replacement need acceptance testing?+
Yes. The California Energy Commission's guidance for building inspectors states that all HVAC replacements require acceptance testing, even when considered like-for-like. A packaged unit replacement typically involves the outdoor air, single-zone controls, economizer, and fault detection tests, depending on the unit's features.
Who can perform these tests?+
Every test this tool lists is a mechanical acceptance test that must be performed by a certified Mechanical Acceptance Test Technician working for a certified Acceptance Test Employer.

Related Title 24 Guides