ABS

7 min read · Updated

Acceptance Test Technician (ATT): California's Certification Program

For most of the Energy Code's history, anyone could sign an acceptance test form. Studies found many tests were never performed or performed poorly, so California built a certification program around them. Today, only a certified Acceptance Test Technician may perform the Energy Code's mechanical and lighting controls acceptance tests. This guide explains how the program is structured and how to confirm a technician is qualified.

📝 Educational reference

This summary follows the California Energy Commission's published program information. Certification requirements, fees, and training are set by each certification provider.

Three Roles

Approved Mechanical Certification Providers

The Energy Commission's 2025 Energy Code materials list three ATTCPs for mechanical systems. Each publishes a directory of the technicians it has certified:

Provider Full name Technician directory
NEMIC National Energy Management Institute Committee (also referred to as TABB) Find a technician
CSPTC California State Pipe Trades Council Find a technician
RSES Refrigeration Service Engineers Society Find a technician

Lighting controls technicians are certified by CALCTP (California Advanced Lighting Controls Training Program) and NLCAA (National Lighting Contractors Association of America). Check the Energy Commission's ATTCP page for the current list, since approvals are renewed for each code cycle.

What ATTs Are Allowed to Do

A mechanical ATT performs the tests on Certificates of Acceptance numbered NRCA-MCH, covering outdoor air, economizers, demand control ventilation, variable flow fans and pumps, fault detection, and related controls. The full list is in Title 24 Mechanical Acceptance Tests.

Acceptance testing for building envelope and covered processes, such as kitchen exhaust and laboratory fume hoods, does not require an ATT. Those tests may be performed by the builder, contractor, engineer, or commissioning agent.

How Certificates Are Recorded

The ATT completes each Certificate of Acceptance through the certification provider's system. The provider records it and marks it with its logo and a watermark. That mark is what tells a building inspector the certificate is genuine. Providers also run quality assurance programs, including review of a sample of submitted forms and shadow audits of technicians in the field.

How to Verify a Technician

  1. Ask for the technician's name, certification number, and certifying provider.
  2. Search for the technician in that provider's directory, linked above.
  3. Confirm the certification is for mechanical systems and is current.
  4. Confirm the employer is listed as a certified Acceptance Test Employer.
  5. When certificates are delivered, check for the provider's logo and watermark.

Building inspectors are advised by the Energy Commission to do the same checks at final inspection, so a certificate from an uncertified technician is likely to be rejected and the test repeated.

Why the Program Exists

The Energy Commission notes that compliance with acceptance testing has been low, often because the required tests were never identified on the Certificate of Compliance, so no one completed them after installation. Certification addresses the quality side of the problem. The rest depends on project teams reading their compliance documents early and scheduling the tests before final inspection.

Sources

FAQ

What is an Acceptance Test Technician?+
In the California Energy Commission's definition, an Acceptance Test Technician (ATT) is an installation technician certified by an Acceptance Test Technician Certification Provider to perform nonresidential acceptance testing for lighting controls (Title 24, Part 6, Section 130.4) or mechanical systems (Section 120.5). Lighting and mechanical are separate certifications.
Does the ATT have to be independent of the installing contractor?+
No. The Energy Commission states that acceptance testing can be performed by the installing technician or by a third party. Many mechanical and controls contractors employ their own certified technicians. What matters is that the person performing the test holds a current mechanical ATT certification and works for a certified Acceptance Test Employer.
What is an Acceptance Test Employer?+
An Acceptance Test Employer (ATE) is a company certified by an ATTCP to employ ATTs. Every ATT must be employed by an ATE, including self-employed technicians. The employer itself cannot perform acceptance tests; only its certified technicians can.
How do I check that a technician is certified?+
Look the technician up by name or certification number in the directory of the certification provider that issued the certification. Each approved ATTCP maintains its own public directory. If the name and number appear there, the certification is valid. Building inspectors also check that the completed Certificate of Acceptance carries that provider's logo and watermark.
Since when has mechanical ATT certification been required?+
Lighting controls acceptance tests have required a certified ATT since July 2014. For mechanical systems the requirement took effect on April 14, 2021, and the Energy Commission asked enforcement agencies to apply it to nonresidential permit applications submitted on or after October 1, 2021.
Does a HERS or ECC rater certification qualify someone to do acceptance tests?+
No. ECC-Rater certification (formerly HERS rater) covers field verification and diagnostic testing, mainly in homes and multifamily dwelling units. Mechanical acceptance testing requires the separate ATT certification. Some technicians and firms hold both.